DMB05 4-in-1 Multifunction Indoor Air Quality Large LED Display / Monitor / Indicator

【4-in-1】 Monitor PM2.5, CO2, temperature & humidity via RS-485 at the same time.
【High Brightness LED】Easily recognize measuring types and values.

DMB05 4-in-1 Multifunction Indoor Air Quality Large LED Display / Monitor / Indicator

【4-in-1】 Monitor PM2.5, CO2, temperature & humidity via RS-485 at the same time.
【High Brightness LED】Easily recognize measuring types and values.


【4-in-1】 Monitor PM2.5, CO2, temperature & humidity via RS-485 at the same time.
【High Brightness LED】Easily recognize measuring types and values.
【6-segment CO2 Emoticon】As the local situation and refer to CO2 indication standards to transfer the suitable emoticon
【6-segment PMV Indication】Refer to PMV indication to display the real-time body sensing.


Display Scale
Display Type:High Brightness LED 
Temperature:1.5" ( 3.8 cm ) red LED
Humidity:1.5" ( 3.8 cm ) red LED
PM2.5:2.3" ( 5.8 cm ) yellow LED
CO2:2.3" ( 5.8 cm ) green LED

Display Range
Temperature:0 ... 50 ℃
Humidity:0 … 100 %RH 
PM2.5:0 … 500 μg / m3
CO2:0 … 2000 PPM

Accuracy
Temperature:± 0.4℃
Humidity:± 3 %RH ( at 20 ... 90 %RH )
PM2.5:± 10 μg / m3 ± 5 % of Reading
CO2:± 40 PPM ± 3 % of Reading

Input
Input:RS-485

Output
Signal Output:RS-485
Protocol:Protocol 
Interface:Modbus RTU
Relay x 2 set:AC 230V / DC 24V, 5A
Address:1 … FF ( 16 Hex )
Baud Rate:19200, 9600, 4800, 2400, 115200, 57600, 38400
Frame:N.81, N.8.2, E.8.1, O.8.1

Installation
Installation:Indoor and Wall type

Dimension
Dimension:460 ( L ) x 295 ( H ) x 60 ( D ) mm


Monitor environment for Industrial Process / Plant / IDC / Clean room / Laboratory / Agriculture / Storage / Hospital / Department store / Office building / Hotel / Restaurant / Library / Banks and so on.

Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.