FUM06 Ultrasonic Flowmeter
Features : Non-intrusive and high-precision measurement, suitable for various fluids and pipe sizes.
Sensor type : Ultrasonic time difference
Turndown ratio : 100 : 1
Measuring range : 0.1 ... 10 m/s
Output : 4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy : ±1% F.S.
IP rating : IP65
FUM06 Ultrasonic Flowmeter
Features : Non-intrusive and high-precision measurement, suitable for various fluids and pipe sizes.
Sensor type : Ultrasonic time difference
Turndown ratio : 100 : 1
Measuring range : 0.1 ... 10 m/s
Output : 4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy : ±1% F.S.
IP rating : IP65
Features
● With ultrasonic technology, it can accurately measure the flow rate of 0.1 m/s.
● Wide measurement range (DN50 ~ DN300), easy installation
● 2″ LCD color screen displays flow rate and flow, easy to set with buttons
● Installed on the measuring pipe, the two are connected with a special cable and can be used with a temperature meter for measurement
Specification
Input | |
Sensor type | Ultrasonic time difference |
Turndown ratio | 100 : 1 |
Measuring range | 0.1 ... 10 m/s |
Transducers | TM-1, cable 10 m |
Output | |
Output signal | 4 ... 20 mA / 0 ... 10 V / RS-485 |
Temp. measurement | Can connect Pt1000 thermometer (RS-485 reading) |
Load resistance | Current output : ≦500 Ω |
Accuracy | |
Accuracy | ±1% F.S. |
Display | |
Display readout | -99.99 ... +99.55 (Flow rate) |
Decimal point | Button |
Sampling time | 1 cycle/sec |
Unit | m/s、ft/s、L/min、CMM、CFM、CFH |
Response time adjustment range | 1 sec |
Environmental | |
Operating Temp. & Humid. | 0 ... 50°C / 20 ... 85%RH(Non-condensing) |
Storage Temp. | -25 ... 60°C |
Transducers Temp. | -30 ... 90°C |
Medium | Water, Sea water, Alcohol, Acetone, Methanol, Ethanol, Acetaldehyde, Peanut oil, Glycerin, Benzene, Toluene, Ethylbenzene, Petroleum, Pine oil, Ketone, Ethylene glycol |
Communication | |
Communication methods & protocol | RS-485 Modbus RTU |
RS-485 baud rate | 9600、19200、38400、57600、115200 bps |
Electrical | |
Power supply | DC 24 V ±10% |
Current consumption | 24 V : 110 mA |
Electrical connection | M12 5P connector |
Pipe installation condition | |
Pipe material | Steel, Stainless steel, Cast iron, Copper, PVC, Aluminum, Fiberglass |
Straight pipe | Transmitter installation should be satisfied : upstream 10 D, downstream 5D, 30D from the pump |
Installation | Clamp type |
Pipe diameter | DN50 ... DN300 |
Certification | |
Certification | CE |
Protection | |
IP rating | IP65(Housing) |
Electrical protection | ■ Reverse polarity ■ Over-voltage |
Material | |
Housing | Aluminum alloy |
Probe | PC |
Applications
Process / Energy-saving monitoring in industries such as petrochemicals / Water conservancy / Metallurgy / Chemistry / Machinery energy saving