FPC04 Flow Switch-Piston Type

Features : Compact size. Economic model.
Hysteresis : Depends on switching point, minimum 0.6 L / min
Medium : Water, Oil, Gas
Connection mode : Connector specification M12
Pressure resistance : 100 bar(Stainless steel) / 10 bar(Plastic)

FPC04 Flow Switch-Piston Type

Features : Compact size. Economic model.
Hysteresis : Depends on switching point, minimum 0.6 L / min
Medium : Water, Oil, Gas
Connection mode : Connector specification M12
Pressure resistance : 100 bar(Stainless steel) / 10 bar(Plastic)


● Housing : Plastic / Stainless Steel,Protection Rating IP65
● Pressure resistance 100bar (Stainless steel)
● Minimal pressure loss, good repeatability, dirt-resistant high switch capability

Mechanical flow switch for liquid or gaseous media,with spring-supported piston and magnetic triggering of a reed switch. Rugged design in plastic or brass


ITEM

Function & Parameter

Range
Table 1 below
Flow range
Accuracy
Accuracy
The total range ± 5%
Hysteresis
L / min
Depending on switching point, minimum 0.6 L/min
Switch setting scale
According to media distinction
Media : Water, Temp. : 20 °C, The standard state is set in the horizontal installation state.
Installation position, media, and temperature changes have a slight effect on the switching value.
Media measured
Liquid / Gas
Water, Oil, Gas
Wiring
Connector
M12
Output
Reed switch
Capacity : 220 VAC, 100 mA
Pressure resistance
Unit : bar
Stainless steel : 100 bar, Plastic : 10 bar
Average pressure loss
L / min
0.3 bar ( in 25 L/min )
Medium Temp.
°C
Max : 90 °C
Protection rating
IP
IP65
Material
Plastic / Stainless steel
Housing : Plastic / Stainless Steel, Piston : Plastic, Spring : Stainless Steel, Seal : NBR
Electrical connector
M12
with 2 m cable

 

PipeFlow(Max)RangeWeight(g)
L/min(water)L/min(water)MetalPlastic
DN010400.6 … 844588
DN015400.6 … 844588
DN020401 … 15860165
DN025401 … 15860165

Automated industry / Equipment / Air compression industry / Refrigeration & Air conditioning

Note : Design and specifications are subject to change without notice.
Note : Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.