TP01 Temperature Transmitter(2-Wire RTD Head-Mounting Type)
Features : Cost effective. ZERO / SPAN adjustment.
Sensor type : RTD Pt100 (3-wire)
Measuring range : -50 ... 400°C
Output : DC 4 ... 20 mA (2-wire)
Accuracy : ±0.1% F.S.
IP rating : IP30(Housing) / IP10(Terminal)
Features
● High quality, good anti-interference, high cost performance
● Large round head installation
● Temperature range : -50 ... 400°C
● 4 ... 20 mA
● ZERO / SPAN adjustable
● Polarity protection ; Over-voltage ; Short-circuit
Introduction
● Linearised temperature measurement with Pt100 sensor
● To avoid temperature signal attenuation during long-distance transmission, it converts Pt100 into standard analog current output DC 4 ... 20 mA (2-wire)
● In this way, a stable and accurate figure can be collected and shown on the display of terminal instrument. The instrument includes PLC, digital display, industrial computer, etc
Specification
Input | |
Input signal | RTD Pt100 Ω(3-wire) |
Cable resistance | ≦50 Ω(3 wires with the same resistance) |
PT100Ω sensor current | <0.8 mA |
ZERO adjustment range | ±10% |
SPAN adjustment range | ±10% |
Output | |
Signal | DC 4 ... 20 mA(2-wire) |
Load resistance | ≦(Supply voltage - 8 V) / 0.02 A Ω |
Load resistance stability | ±0.05% / 100 Ω |
Pt100Ω signal disconnection protection & output | >23 mA |
Accuracy | |
Accuracy | ±0.1% of F.S. |
Temperature | |
Temperature drift | <±0.015%F.S. / °C |
Calibration temperature | 20 ... 28°C |
Response time | <250 ms |
Environmental | |
Medium | Air |
Operating Temp. | -20 ... 60°C |
Operating Humid. | 0 ... 95%RH(Non-condensing) |
Electrical | |
Power supply | DC 10 ... 30 V |
Protection | |
IP rating | Housing : IP30 / Terminal : IP10 |
Certification | |
Certification | CE |
Material | |
Housing | ABS(UL94V-0) |
Weight | 40g |
Applications
Integrated with thermocouple / Cooling system / Environment / Agriculture / Air conditioning engineering / Heating engineering / Storage tank / Equipment