Smoke exhaust system air volume measurement-eYc FTM06C-A Thermal Mass Air Velocity and Air Volume Transmitter

Smoke exhaust system air volume measurement-eYc FTM06C-A Thermal Mass Air Velocity and Air Volume Transmitter

Many years, eYc thermal mass air velocity and air volume transmitter have assisted many industries to improve the difficulties in air flow measurement. FTM06C-A thermal mass air velocity and air volume transmitter have been developed for measurement in harsh environments. Especially in the smoke exhaust system, the gas in the pipe will contain dust, which will affect the accuracy of the air volume measurement. FTM06C-A specifically solves the problem of inaccurate wind speed and air volume measurement due to dust in the gas.

The station environmental control system includes air conditioning, ventilation, smoke exhaust, tunnel ventilation and other systems. Its functions are: the air conditioning and ventilation system is to make the indoor temperature and humidity meets the requirements, the smoke exhaust system is the disaster prevention and response system of the station, and the tunnel ventilation system is to provide safety, comfortable environment and required air quality.

Among them, the smoke exhaust system is a link that requires precise monitoring. The main function is to carry out emergency response to achieve disaster prevention. If a large amount of dense fog is generated for some reason, the system will activate the smoke exhaust function to provide clean air through the exhaust duct and exhaust take a lot of dense fog. eYc FTM06C-A can measure the cumulative flow/instant flow. It is installed in the exhaust duct of the ventilation system. It can accurately measure the air volume, so as to provide enough air and maintain the flow of air to prevent the spread of smoke and maintain the escape path. In addition, a variety of flow units can be selected for measurement through the UI as needed, including: m/s, ft/s, Nm³/h, L/min.

Products Recommended： eYc FTM06C-A Thermal Mass Air Velocity and Air Volume Transmitter ■ Produced by gas flow calibration system and wind tunnel calibration. ■ Turndown ratio 500：1, comes with high precision & accurate sensing at the lowest flow rate for metering applications. ■ Using three high-sensitivity sensing elements, with faster response and better sensitivity.  ■ Easy maintenance, easy to clean, can be used for micro-corrosive gas, dust-resistant, and can maintain stable performance in harsh environments, etc. . ■ Use measured with square pipe or 2" pipe above, suitable for a variety of industrial environments and fields. Measuring range：0 ... 60 m/s Accruacy：±1.5% Probe operating Temp.：120℃ Material：SUS304 (including probe) IP rating：IP65 Applications：The station environmental control system /  Ventilation, smoke exhaust systems / Exhaust gas emission flow monitoring / Special gas process / Semiconductor / Electronics factory / Compressed air monitoring / Industrial process air velocity and air volume measurement