TP01 Temperature Transmitter(2-Wire RTD Head-Mounting Type)
Model :
TP01
Features : Cost effective. ZERO / SPAN adjustment.
Sensor type : RTD Pt100 (3-wire)
Measuring range : -50 ... 400°C
Output : DC 4 ... 20 mA (2-wire)
Accuracy : ±0.1% F.S.
IP rating : IP30(Housing) / IP10(Terminal)
Sensor type : RTD Pt100 (3-wire)
Measuring range : -50 ... 400°C
Output : DC 4 ... 20 mA (2-wire)
Accuracy : ±0.1% F.S.
IP rating : IP30(Housing) / IP10(Terminal)
-
Features● High quality, good anti-interference, high cost performance
● Large round head installation
● Temperature range : -50 ... 400°C
● 4 ... 20 mA
● ZERO / SPAN adjustable
● Polarity protection ; Over-voltage ; Short-circuit
Introduction
● Linearised temperature measurement with Pt100 sensor
● To avoid temperature signal attenuation during long-distance transmission, it converts Pt100 into standard analog current output DC 4 ... 20 mA (2-wire)
● In this way, a stable and accurate figure can be collected and shown on the display of terminal instrument. The instrument includes PLC, digital display, industrial computer, etc
-
ApplicationsIntegrated with thermocouple / Cooling system / Environment / Agriculture / Air conditioning engineering / Heating engineering / Storage tank / Equipment
-
Download
-
Specification
Input
Input signal
RTD Pt100 Ω(3-wire)
Cable resistance
≦50 Ω(3 wires with the same resistance)
PT100Ω sensor current
＜0.8 mA
ZERO adjustment range
±10%
SPAN adjustment range
±10%
Output
Signal
DC 4 ... 20 mA(2-wire)
Load resistance
≦(Supply voltage - 8 V) / 0.02 A Ω
Load resistance stability
±0.05% / 100 Ω
Pt100Ω signal disconnection protection & output
＞23 mA
Accuracy
Accuracy
±0.1% of F.S.
Temperature
Temperature drift
＜±0.015%F.S. / °C
Calibration temperature
20 ... 28°C
Response time
＜250 ms
Environmental
Medium
Air
Operating Temp.
-20 ... 60°C
Operating Humid.
0 ... 95%RH(Non-condensing)
Electrical
Power supply
DC 10 ... 30 V
Protection
IP rating
Housing : IP30 / Terminal : IP10
Certification
Certification
CE
Material
Housing
ABS(UL94V-0)
Weight
40g
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.