• eyc-tech FTE120-I Inline Type Air Flow Transmitter

FTE120-I Inline Type Air Flow Transmitter

Model : FTE120-I
Features : Inline type air flow sensor designed for pneumatic system and compressed air system. Multiple diameter. Sonic nozzles calibration.
Sensor type : Thermal mass flow sensor
Measuring range : 0 ... 1500 l/min
Output : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse
Accuracy : ±2% F.S.
IP rating : IP 65 (Housing) / IP20 (Probe)
  • Features
    ● Optional multiple output : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency / Pulse ( Option )
    ● Accuracy : ±2% F.S. , Operating pressure : Max. 10 bar
    ● Calibrated by sonic nozzles calibration system
    ● Multiple diameter ( DN10 / DN15 / DN20 / DN25 ), easy installation
    ● Polycarbonate housing, aluminum alloy pipe
    ● RS-485 programmable software : Data logger / Charts
  • Applications
    Pneumatic system / Compressed air system / Industrial machinery equipment / Pipeline air flow monitoring
  • Download
  • Specification
    Input
    Sensor type : Thermal mass flow sensor
    Measuring range* : DN10 : 0 ... 150 l/min
                                   DN15 : 0 ... 500 l/min
                                   DN20 : 0 ... 1000 l/min
                                   DN25 : 0 ... 1500 l/min
    Minimum measuring range : 5 l/min
    *The measurement range is defined at the standard condition(1013 mbar, 20°C). This product is also calibrated at this condition.


    Output
    Signal : 4 ... 20 mA / 0 ... 10 V / RS-485 / Frequency ( 0 ... 100 Hz ) / Pulse ( 1 ... 100 l/pulse, option )
    Accuracy : ±2% F.S.
    Temp. influence : 0.2% / °C
    Response time : t90≦5 sec
    Load resistance : Current output : ≦ 500 Ω, Voltage output : ≧ 100 KΩ
    Warm-up time : < 2 min.


    Environmental
    Medium : Air
    Housing operating Temp. / Humid. : 0 ... 50°C / 0 ... 95%RH(Non-condensing)
    Medium operating Temp. / Humid. : 0 ... 50°C / 0 ... 95%RH(Non-condensing)
    Storage Temp. : -20 ... +60°C
    Operating pressure : 10 bar


    Electrical
    Power supply : DC 24 V ±10%
    Current consumption : 100 mA
    Overvoltage protection : DC : < 40 V
    Electrical connections : PVC cable (1 m)


    Installation
    Inline type : DN10 - G1/4″
                       DN15 - G1/2″
                       DN20 - G3/4″
                       DN25 - G1″


    Protection
    IP rating : IP 65 (Housing) / IP20 (Probe)
    Electrical protection : ■ Reverse polarity ■ Over-voltage ■ Short-circuit


    Certification
    Certification : CE


    Material
    Housing : PC
    Pipe : Aluminum alloy
    Weight : DN10 : 160 g
                  DN15 : 400 g
                  DN20 : 465 g
                  DN25 : 520 g
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.