FDM08 Venturi Inline Type Air Flow Transmitter
Model :
FDM08
Features : Venturi inline type air flow measurement, a wide range of applications
Sensor type : Differential pressure sensor
Air flow measuring range : Reference airflow range table based on environmental conditions
Output signal: 4 ... 20 mA
Accuracy : ±2%
IP rating : IP65 (Housing)
Sensor type : Differential pressure sensor
Air flow measuring range : Reference airflow range table based on environmental conditions
Output signal: 4 ... 20 mA
Accuracy : ±2%
IP rating : IP65 (Housing)
-
Features● Precision measurement : Adopting the unique fluid dynamics principles of Venturi tube, the FDM08 provides accurate measurement.
● Wide range of applications : Suitable for general gases, steam, contaminated gases, or high-humidity gases.
● Stable performance : No moving or electronic parts inside the pipeline, ensuring excellent long-term stability.
● Easy installation : Shorter front and rear straight pipe sections compared to standard throttling devices, approximately 2.5D in the front and 2D in the rear.
● Low pressure loss : Designed to minimize pressure loss, reducing energy consumption. -
ApplicationsCompressed air systems / Boiler systems / Industrial process gases / Water treatment aeration systems
-
Download
-
Specification
Measurement
Sensor type
Differential pressure sensor
Air flow measuring range*
Reference airflow range table based on environmental conditions
Turndown ratio
≥ 10 : 1
*The measurement range is defined at the standard condition(1013 mbar, 20°C).
*Pairs with DPM04 Flow Totalizer for instant conversion of differential pressure to air velocity and volume.
Accuracy
Accuracy
±2%F.S.
Temp. influence
±0.5%F.S.
Long-term stability
±0.2%F.S./year
Zero drift
±0.25%F.S.
Electrical
Output signal
4, ..., 20 mA
Power supply
DC 24V ± 10%
Electrical connection
M20 * 1.5
Environmental
Medium Temp.
-40°C, ..., +120°C
Operating Temp.
-30°C, ..., +70°C
Operating Humid.
0, …, 95%RH (Non-condensing)
Operating pressure
16 bars
Storage Temp.
-30°C, ..., +70°C
Installation
Pipe connection
G thread
Pipe size
DN 25/40/50/80/100
Protection
IP rating
IP65 (Housing)
Material
Pipe
Aluminum alloy
Sensor
Diaphragm: SS316L
O-ring: Nitrile Butadiene Rubber (NBR)
(Contact measuring medium)
Filling oil: Silicon oil
Fittings: SS304
Housing: Die-cast aluminum epoxy coatingWeight
DN25: 4.0 kg
DN40: 4.5 kg
DN50: 5.0 kg
DN80 : 10.1 kg
DN100 : 13.1 kg
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.