FDM06S Differential Pressure Type Air Flow Transmitter
Model :
FDM06S
Features : Adopting the differential pressure principle for air flow measurement, enable bi-direction air flow measurement, Calculate medium density and mass flow rate
Sensor type : Differential pressure sensor
Measuring range : Standard version : ± (0.8 ... 40 m/s) / High-pressure version : ± (10 ... 200 m/s)
Output : 4 ... 20 mA + RS-485 / 0 ... 10 V + RS-485 / Frequency ( 0 ... 100 Hz ) + RS-485 / Pulse ( Option ) + RS-485
Accuracy : ±1.5% F.S. (Option±1% F.S.)
IP rating : IP65 (Body) / IP20 (Probe head)
Sensor type : Differential pressure sensor
Measuring range : Standard version : ± (0.8 ... 40 m/s) / High-pressure version : ± (10 ... 200 m/s)
Output : 4 ... 20 mA + RS-485 / 0 ... 10 V + RS-485 / Frequency ( 0 ... 100 Hz ) + RS-485 / Pulse ( Option ) + RS-485
Accuracy : ±1.5% F.S. (Option±1% F.S.)
IP rating : IP65 (Body) / IP20 (Probe head)
-
Features● Adopting the differential pressure principle for air flow measurement
● Enable bi-direction air flow measurement
● Measures differential pressure, pressure, and temperature simultaneously
● Special diversion design reduces the impact of air flow turbulence
● Calculate medium density and mass flow rate
● Rugged and durable design for high temperature and high-pressure environment -
ApplicationsAir compressor system / Industrial process / Exhaust system
-
Download
-
SpecificationInput
Sensor type : Differential pressure sensor
Measuring range : Standard version : ± (0.8 ... 40 m/s) / High-pressure version : ± (10 ... 200 m/s)
Installation angle effect : <3% of the measured value (When the installation angle<10°)
Output
Output : 4 ... 20 mA + RS-485 / 0 ... 10 V + RS-485 / Frequency ( 0 ... 100 Hz ) + RS-485 / Pulse ( Option ) + RS-485
Preset output : Out1 : Air velocity
Signal connection : 3-wire
Warm-up time : <60 sec
Response time : t90<5 sec
Load resistance : Current output : ≦500 Ω / Voltage output : ≧10 KΩ
Accuracy
Accuracy : ±1.5% F.S. (Option±1% F.S.)
Temp. influence : 0.05% / °C
Electrical
Power supply : DC 24 V±10%
Current consumption : <0.1 A
Overvoltage protection : DC : < 30 V
Electrical connections : M12 connector
Environmental
Measuring medium : Air
Operating Temp. : -20 ... +60°C(Display) / -20 ... +80°C(No display)
Operating Humid. : 0 ... 95%RH(Non-condensing)
Probe operating Temp. : 100°C (Optional 200°C)
Storage Temp. : -20 ... +80°C
Storage Humid. : 0 ... 95%RH(Non-condensing)
Probe pressure : Standard version : 2 bar / High-pressure version : 10 bar
Installation
Duct type : 3/4" PT movable thread
Flange pipe type : 2″ ... 6″
Inline type : 2″
Certification
Certification : CE
Protection
IP rating : IP65 (Body) / IP20 (Probe head)
Electrical protection : ■ Reverse polarity ■ Over-voltage ■ Short-circuit
Material
Display : PC with glass fiber
Housing : SUS304
Probe : SUS304
Probe head : SUS304
Weight (without cable) : 575 g (Display, probe length 180 mm)
692 g (Display, probe length 330 mm)
602 g (No display, probe length 180 mm)
719 g (No display, probe length 330 mm)
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.