TP04 Temperature Transmitter (2-wire for duct type)
Model :
TP04
Features:Suitable for industrial application. Integrated design combines PT100Ω and transmitter. Easy installation.
Sensor type:RTD Pt100
Measuring range:-50 ... 200°C
Output:DC 4 ... 20 mA(2-wire)
Accuracy:±0.5% F.S.
IP rating:IP65
Sensor type:RTD Pt100
Measuring range:-50 ... 200°C
Output:DC 4 ... 20 mA(2-wire)
Accuracy:±0.5% F.S.
IP rating:IP65
-
Features● SS Housing, all-in design with anti-condensation function and good heat dissipation
● Good measuring repeatability and anti-interference
● Monitoring for long-distance temperature signal transmission
● Signal transfer from PT sensor to 4 ... 20 mA
● With SD05 integrated signal indicator for local display(Optional)
-
ApplicationsFor industries in heating / Ventilation / Air conditioning / Cooling / Water power / Electricity, etc. / For process in agriculture / Green house / Environmental engineering / Food / Pharmaceutical industry / Machinery manufacturing / Storage tank / Compressor / Hydraulic equipment
-
Download
-
SpecificationInput
Input : RTD Pt100 Ω
Pt100 Ω sensor current : <0.8 mA
ZERO adjustment range : ±10%
SPAN adjustment range : ±10%
Output
Output : DC 4 ... 20 mA((2-wire)
Accuracy : ±0.5% of F.S.
Load resistance : ≦ (Supply voltage - 8 V) / 0.02A Ω
Power stability : ±0.025% / V
Temperature drift : <± 0.015%F.S. / °C
Calibration temperature : 20 ... 28°C
Response time : < 250 ms
Electrical
Power supply : DC 10 ... 30 V
Electrical connector : DIN 43650 ABS
Environment
Medium : Air
Operating Temp. : -20 ... 80°C
Operating humidity : 100%RH (Non-condensing)
Protection
Pt100Ω signal disconnection protection & output : >23 mA
Pt100Ω signal short circuit protection & output : <3 mA
Output polarity protection : Yes
IP rating : IP65
Certification
Certification : CE
Material
Housing : SUS304
Weight : 50 mm:250 g / 200 mm:260 g
Option
Sleeve pipe / Size : 30 / 80 / 130 / 180 mm R1/2″sleeve
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.