TP02 Temperature Transmitter for DIN-rail Type
Model :
TP02
Features：Compact size. Easy to install. Cost effective.
Sensor type：RTD Pt100(3-wire)
Measuring range：-50 ... 200°C
Output：DC 4 ... 20 mA(2-wire)
Accuracy：±0.1% F.S.
IP rating：IP30(Housing) / IP10(Terminal)
Sensor type：RTD Pt100(3-wire)
Measuring range：-50 ... 200°C
Output：DC 4 ... 20 mA(2-wire)
Accuracy：±0.1% F.S.
IP rating：IP30(Housing) / IP10(Terminal)
-
Features● Special IC for RTD；High accuracy is assured
● TP02 with smaller volume so lesser space for installation is required
● High quality and low price
● DIN-rail type；Quick to install
-
ApplicationsMonitoring for long-distance temperature signal transmission / For industries in heating / Ventilation / Air conditioning / Cooling / Water power / Electricity, etc. / For process in agriculture / Green house / Environmental engineering / Food / Pharmaceutical industry
-
Download
-
SpecificationInput
Input signal：RTD Pt100(3-wire)
Cable resistance：≦50 Ω(3 wires with the same resistance)
Pt100 sensor current：＜0.8 mA
ZERO adjustment range：±10%
SPAN adjustment range：±10%
Output
Output signal：DC 4 ... 20 mA(2-wire)
Load resistance：≦(Supply voltage - 8 V) / 0.02A Ω
Load resistance stability：±0.05% / 100Ω
Power stability：±0.025% / V
Accuracy
Accuracy：±0.1% of F.S.
Temperature
Temperature drift：＜±0.015% F.S. / °C
Calibration temperature ：20 ... 28°C
Response time：＜250 ms
Environment
Medium：Air
Operating temperature：-20 ... 60°C
Operating humidity：0 ... 95%RH(Non-condensing)
Electrical specification
Power supply：DC 10 ... 30 V
Operating environment：-20 ... 60°C / 0 ... 95%RH(Non-condensing)
Protection
Pt100 signal disconnection protection & output：＞23 mA
Pt100 signal short circuit protection & output：＜3 mA
Output polarity protection：Yes
IP rating：Housing：IP30 / Terminal：IP10
Certification
Certification：CE
Material
Housing：ABS(UL94V-0)
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.