eYc THS17, Digital Temperature & Humidity Transmitter, which is probe type to monitor temperature and humidity【2 in 1】, provides plastic or metal case.
Embedded semiconductor MEMS sensor that is the reason of THS17 has nicer long-term stability of measuring and react quickly feature, compact size easy to install.
Also you can choose output type , 4 ... 20 mA ( 2-wire ), 0 ... 10 V( 3-wire ) or RS-485.
More potential product articles, welcome to visit the link below
Temperature : MEMS
Humidity : MEMS
Temperature : 0°C ... +50°C
Humidity : 0 ... +100%RH (Non-condensing)
Output : 4 ... 20 mA ; 0 ... 10 V ; RS-485
Signal connection : 2-wire ; 3-wire
Warm-up time : < 2 min. stable time 20 mins.
Response time : t63 (15 ... 45°C/33 ... 75%RH)≦ 10 sec
Sampling time : About 3 sec
Temperature influence : Max. -0.15%RH/°C (0°C ... 80°C)
Accuracy (at +25°C)
Temperature : ±0.5°C (Suggest range：10°C ... 50°C)
Humidity : ±5%RH (30 ... 80%RH)
( May vary according to actual environmental conditions )
Power supply : DC 10 ... 28 V (2-wire) / DC 19 ... 28 V (3-wire)
Current consumption : 2-wire DC：Max. 45 mA / 3-wire DC：Max. 6 mA
Electrical connection : PVC cable 0.32 mm2
Medium : Air
Operating Temp. : +0°C ... +50°C
Operating Humid. : 0 ... 100%RH (Non-condensing)
Storage temperature : -20°C ... +60°C
Installation : Flange ( PVC / Metal )
IP rating : IP24 ( Sensor )；IP 65 ( Body )
Electrical protection : ■ Polarity protection ■ Over-voltage ■ Short-circuit
Certification : CE
Housing : PC fire-proof ( UL94V-2 ) ( Plastic ) / SUS304 ( Metal )
Cable : PVC
Optional accessory : Metal fitting Thread / Metal flange
Plastic ( with cable ) : 105 g
Metal ( with cable ) : 146 g
*Please make sure the product and the device which connect with RS-485 are on common ground, avoid damaged product.
Option List Download
The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.
Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
Monitoring for HVAC process / Air conditioning / Environmental ventilation control / Environmental monitoring for building / Factory / Clean room / Laboratory / Monitoring for storeroom / Crisper / Agriculture / Food industry / Temperature and humidity measuring in machinery or equipment