THS130/140 Temperature & Humidity Transmitter for Indoor / Duct type
Model :
THS130THS140
Features : Economic model for HVAC application.
Sensor type : MEMS
Measuring range : Temperature 0 ... 50°C / Humidity 0 ... 100%RH
Output : 4 ... 20 mA / 0 ... 10 V
Accuracy : Temperature ±0.5°C / Humidity ±3%RH
IP rating : IP54
Sensor type : MEMS
Measuring range : Temperature 0 ... 50°C / Humidity 0 ... 100%RH
Output : 4 ... 20 mA / 0 ... 10 V
Accuracy : Temperature ±0.5°C / Humidity ±3%RH
IP rating : IP54
-
Features● Excellent long-term stable ability
● Cost-effective and accurate measurement
● Outstanding long-term performance
● Voltage or current outputs -
ApplicationsMonitoring for HVAC process / Air conditioning / Environmental ventilation control / Environmental monitoring for building / Factory / Hospital / Storage rooms / Monitoring for building automation environment
-
Download
-
Specification
Input
Sensor type
MEMS sensor
Measuring range
Temperature
0 ... 50°C
Humidity
0 ... 100%(Non-condensing)
Output
Output
4 ... 20 mA / 0 ... 10 V
Signal connection
3-wire
Warm-up time
＜2 min；Stable time 20 min
Response time
t63(15°C ... 45°C / 33 ... 75%RH)≦ 10 sec
Sampling time
About 3 sec
Temperature influence
Max.-0.15%RH/°C(0°C ... 80°C)
Load resistance
Current＜250 Ω；Voltage≧10 KΩ
Accuracy(at 25°C)
Temperature
±0.5°C
Humidity
±3%RH(30 ... 80%RH)
Electrical
Power supply
DC 19 ... 35 V & AC 24 V±10%
Current consumption
DC : Max. 80 mA / AC : Max. 150 mA
Electrical connection
3-wire : 4P connector
Environment
Medium
Air
Operating Temp.
0 ... + 50°C
Operating Humid.
0 ... 100%RH(Non-condensing)
Storage Temp.
-20 ... +60°C
Installation
Installation
Indoor : Wall mount
Duct : FlangeProtection
IP rating
IP54
Electrical protection
■ Reverse polarity
■ Over-voltage
■ Short circuitCertification
Certification
CE
Material
Housing
PC(PC-110)(UL94V-2)
Weight
THS130 : 113 g
THS140 : 135 g
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.