• eYc THM14EX EX-Series Temp. and Humidity Transmitter

eYc THM14EX EX-Series Temp. and Humidity Transmitter

Feature : Stable & Accurate Performance in Explosion Hazardous Areas
Input : Capacitive Humidity Sensor & PT 1000Ω
Output : 4 ... 20 mA
Range :
Temperature:-20 ... +80°C
Humidity: 0 ... 100 %RH
Accuracy :
Temperature:±0.3°C+0.002°C x t actual
Humidity:±2% RH(15 ... 90 %)
●Additional option (ILAC/TAF) Test report - Standard Calibration laboratory(TAF Accreditation: 3032)
Model : eYc THM14EX

Stable & Accurate Performance in Explosion Hazardous Areas

‧Protection Rating : IP 66
‧Rugged Aluminium Case
‧Stainless Steel Probe
‧High Measurement Accuracy
‧High Long-term Stability

The 
THM14EX is used to measure relative humidity or temperature or relative
humidity and temperature in air and other non-aggressive gases in explosion
hazardous areas and in locations with inflammable dust.
Input : Capacitive Humidity Sensor & PT 1000Ω
Measuring Range : Temperature:-20 ... +80°C
                                 Humidity: 0 ... 100 %RH
Output : 4 ... 20mA
Signal Connection : 2 Wire
Accuracy : Temperature:±0.3°C+0.002°C x t actual
                  Humidity:±2% RH(15 ... 90 %)
Temperature Error : 0.2% RH/°C
Load resistance : 4 ... 20mA ≦ 500Ω
Output Calibration(ZERO & SPAN) Adjustment Span : 10%of zero-point and full-scale
Response Time : t90 (Temp.: +25°C;Flow≧1 m/s) < 20 sec.
Medium : Air
Operating Temp. : -20 ... +80°C
Operating Humidity : 0 ...100%RH (non-cond.)
Storage Temp. : -20 ... +80°C
Power Supply : 24±10%VDC Ui=24V Li=100mA Pi=0.78W Ci0 Li0
Current Consumption : DC<43mA
Electrical Connection : 1/2" NPT Internal Thread
Installation Connection : Metal Quick Connector
Protection Rating : IP66
Electrical Protection : ▪Polarity Reversal Protection ▪Over-voltage ▪Short-circuit
Certification : CE/ATEx
Explosion-proof Mark : Ex ia IIC T4 Ga; Ex tD A21 IP66 T95°C
Material : SUS304/Rugged Aluminum
Weight : Metal: 650g(without wire)

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
‧Protection Rating : IP 66
‧Rugged Aluminium Case
‧Stainless Steel Probe
‧High Measurement Accuracy
‧High Long-term Stability
Semiconductor / Electronics 
Steel Industry / 
Food, Chemical, 
Pharmaceutical, Biotechnology Industries