• FTS34/35 Air Velocity Transmitter

FTS34/35 Air Velocity Transmitter

Model : FTS34FTS35
Features : Suitable for light industry. High accuracy and high stability.
Sensor type : Thermal mass flow sensor
Measuring range : 0 ... 40 m/s
Output : 4 ... 20 mA / DC 0 ... 10 V
Accuracy : ±2% F.S.
IP rating : IP54
  • Features
    ● Linear calibration function
    ● Switch for physical quantity : [m/s], [ft/s], [km/h], [mph], [knot]
    ● Option  RS-485 Communication Interface, Modbus RTU protocol
    ● Configuration measuring rage, analog output, station number by dip switch & RS-485
    ● Off SET function by bottom or RS-485
    ● Programmable software : DATA LOGGER, record, and chart analysis
  • Applications
    Monitor gas and flow for industrial process / HVAC / Building / Factory / Clean room / Hospital / Semiconductor / Electronics / Paper / Environment / Food / Pharmaceutical / Biotechnology industry
  • Download
  • Specification
    Input
    Sensor type : Thermal mass flow sensor
    Measuring range : 2 m/s;10 m/s;20 m/s;40 m/s
    Min. Measuring range : 0.2 m/s

    Output
    Output : 4 ... 20 mA / 0 ... 10 V / RS-485
    Signal connection : 3-wire 
    Load resistance : Current output : ≦500 Ω / Voltage output : ≧10 KΩ
    Response time : t90≦3 sec
    Installation angle effect : <3% measuring value (when the angle<10°)
    Display type : LCD Module with black light
    Display range : Upon request, one deimal place
    Height of character : 5.56 mm

    Accuracy(at +25°C)
    Accuracy : ±2% F.S.(Nonlinear error, hysteresis error, repeatability error)
    Thermal sensitivity Temp. error : 0.1 % / ℃

    Environment
    Measuring medium : Air
    Measuring Temp. : 0 ... 50°C
    Operating Temp. : 0 ... 50℃
    Operating humidity : 95%RH(Non-condensing)
    Storage Temp. : -20 ... +60℃

    Electrical
    Power supply : DC 8 ... 35 V & AC 12 ... 30 V
    Current consumption : DC 8 V : 300 mA,24 V : 100 mA / AC 12 V : 350 mA,24 V : 180 mA
    Overvoltage protection : DC : < 45 V / AC : < 40 V
    Electrical connection : RS-485 or analog : M type ( M12 - 4 PIN connector ) / N type ( M12 plastic cable gland )
                                         RS-485 + analog : M type ( M12 - 5 PIN connector ) / N type ( M16 plastic cable gland )


    Installation;Protection
    Installation;Way to fix : Duct / Remote;Flange
    IP rating : IP 54
    Electrical protection : ■ Reverse polarity ■ Over-voltage ■ Short circuit

    Certification
    Certification : CE

    Material
    Housing / Probe : PC fire-proof(UL94V-2) / PC fire-proof 
    Probe head / Cable : PC with glass fiber / PVC(FTS35)
    Weight : FTS34 : 147g / FTS35 : 200g
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.