FTS07 Hot Wire Air Velocity Transmitter for Probe Type
Model :
FTS07
Features : Probe type. Easy to install. Cost effective.
Sensor type : Hot wire mass flow transmitter
Measuring range : 0 ... 20 m/s
Output : DC 0 ... 10 V
Accuracy : ±5% F.S.
IP rating : IP20
MOQ : 20 PCS
Sensor type : Hot wire mass flow transmitter
Measuring range : 0 ... 20 m/s
Output : DC 0 ... 10 V
Accuracy : ±5% F.S.
IP rating : IP20
MOQ : 20 PCS
-
Features● Measuring range: 10 m/s；20 m/s
● Highly stability and repeatability
● Smaller tolerance in setting angle
● An economical choice, high C/P ratio -
ApplicationsMonitoring for HVAC process / Environmental control and clean room / Laminar flow control
-
Download
-
Specification
Input
Measuring range
10 m/s ; 20 m/s
Min. measuring range
0.2 m/s
Output
Output signal
DC 0 ... 10 V
Signal connection
3-Wire
Load resistance(voltage output)
＞10KΩ
Response time
t90 ≦ 1 sec
Angular dependence
<3% measuring range (install degree < 10°)
Accuracy(+25°C)
Accuracy
±5% F.S.
Environment
Measuring medium
Air
Operating Temp.
15 ... 35°C
Environment humidity
10 ... 90 %RH (Non-condensing)
Storage Temp.
-10 ... +60°C
Electrical
Power supply
DC 24 V ±20%
Current consumption
<70 mA
Overvoltage protection
DC <35 V
Electrical connection
PVC cable 0.32 mm² x 3C
Installation
Fixed seat
Flange installation
Installation
Probe type
Protection
IP rating
IP 20
Electrical protection
■ Reverse polarity
■ Over-voltageCertification
Certification
CE
Material
Housing
PC fire-proof(UL94V-2)
Filter
PC with glass fiber
Cable
PVC
Weight
25 g(Without cable)
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.