• FTE120 OEM Air Flow Transmitter

FTE120 OEM Air Flow Transmitter

Model : FTE120
Features:Suitable for small-sized device or equipment. Compact size. Various installation method.
Sensor type:Thermal mass flow sensor
Measuring range:0 ... 30 m/s
Output:4 ... 20 mA / 0 ... 10 V / RS-485
Accuracy:±2% F.S.
IP rating:IP65
OEM Product : 50 PCS
  • Features
    ● 0 ... 2 m/s, low wind speed measurement
    ● 4 ... 20 mA / 0 ... 10 V output
    ● Accuracy : ±2% F.S.
    ● Small size and light weight, can be mounted fast and easily
    ● Polycarbonate housing, great electrical insulation and flame-retardant properties
    ● RS-485 programmable software : Data logger / Charts
  • Applications
    Air handling systems / Fume hood / Biological safety cabinets / Clean room / Laboratory / Industrial machinery and equipment
  • Download
  • Specification
    Input
    Sensor:RTD Thermal mass flow sensor
    Measuring range:0 ... 30 m/s
    Minimum measuring range:0.2 m/s, 0.1 m/s(optional)

    Output
    Signal:4 ... 20 mA / 0 ... 10 V / RS-485
    Accuracy:±2% F.S.
    Temp. influence:0.2% / °C
    Response time:t90≦5 sec
    Load resistance:Current output:≦ 500 Ω / Voltage output:≧ 100 KΩ
    Installation angle effect:<3% of the measured value(When the installation angle<10°)
    Warm-up time:< 2 min.

    Environmental
    Medium:Air
    Body operating Temp.:0 ... 50°C
    Body operating Humid.:95%RH(Non-condensing)
    Storage Temp.:-20 ... +60°C

    Electrical
    Power supply:DC 24 V ±10%
    Current consumption:100 mA
    Overvoltage protection:DC:< 40V
    Electrical connections:PVC cable

    Installation
    Installation:PC nut type / PT movable thread type / Inline type

    Protection
    IP rating:IP 65
    Electrical protection:■ Reverse polarity ■ Over-voltage ■ Short-circuit

    Certification
    Certification:CE

    Material
    Housing:PC
    Weight:133g
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.