FTC05 Hot Wire Thermal Flow Switch
Model :
FTC05
Features : Suitable for oil, water and liquid flow monitoring. Also work as level detector.
Sensor type : Resistance Temperature Detector (RTD)
Measuring range : 1 ... 200 cm/s(Water) / 3 ... 300 cm/s(Oil) / 6 ... 20 m/s(Gas)
Output : PNP / NPN / Relay
IP rating : IP65 (Option IP67)
Sensor type : Resistance Temperature Detector (RTD)
Measuring range : 1 ... 200 cm/s(Water) / 3 ... 300 cm/s(Oil) / 6 ... 20 m/s(Gas)
Output : PNP / NPN / Relay
IP rating : IP65 (Option IP67)
-
Features● The flow switch is suitable for oil, water, gas and liquid level detection
● Can set the switch point or range
● PNP/NPN/Relay output selectable
● Metal shell design, easy installation, measuring rod withstand pressure of 10 bar (length can be customized)
● LED light indicator, simple shape -
ApplicationsHydraulic / Lubrication system / Pump protection / Cooling system / Venting systems / Water treatment / Leak monitoring / Flow detection and control of various delivery pipelines
-
Download
-
Specification
Input
Input
Resistance Temperature Detector (RTD)
Measuring range
Water : 1 ... 200 cm/s
Oil : 3 ... 300 cm/s
Gas : 6 ... 20 m/sOutput
Output
PNP / NPN / Relay
Signal connection
M12
Load resistance
Type NPN, PNP : 500mA when powered by DC 24 V
Relay : 36 WResponse time
≦3 s
Warm-up time
≦10 s
Environmental
Medium
Water, oil and gas which is compatible with stainless steel
Medium temperature
0 ... +50°C
Operating Temp.
-20 ... +60°C
Operating Humid.
0 ... 100%RH
Storage temperature
-40 ... +85°C
Proof pressure
10 bar
Electrical
Power supply
DC 24 V ±10%
Current consumption
≦70 mA
Overvoltage protection
DC 40 V (Max.)
Electrical connection
M12 connector
Installation
Installation
Thread
Protection
IP rating
IP65 (Option IP67)
Electrical protection
■ Reverse polarity
■ Over-voltage
■ Short-circuitCertification
Certification
CE
Material
Housing
SUS304
Weight
290 g (Without wire)
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.