AFMT Average Flow Measuring Tube ( Pitot tube )
Model :
AFMT
Features:Multi-point averaging. Suitable for large pipe. Resistant to high temperature, and corrosion.
Operating pressure:Max.10 bar
Operating temperature:Max.250°C
Length:4" ... 40"(100 ... 1000 mm)
Operating pressure:Max.10 bar
Operating temperature:Max.250°C
Length:4" ... 40"(100 ... 1000 mm)
-
Features● Stainless steel housing, high temperature resistant, corrosion resistance, dust resistance, can measure micro flow rates
● With eyc-tech industrial grade differential pressure transmitter for air velocity measurement
● Applied in harsh environments, exhaust gas emission, environmental protection engineering, installation location is not restricted
※Can be customized according to customer needs
AFMT and differential pressure transmitter are often being used in the measurement of flow. With several pressure detecting holes on the AFMT, we can get the average of the flow inside the duct and improve the problem happened in the flow measuring where disturbance occurs when there’s no adequate space inside the straight inlet.
AFMT is a probe we inserted into the duct(along with the whole diameter) to measure the flow. When the probe encounters the flow, will sense and get the average total pressure P1 in windward side and static pressure P2 in leeward. AFMT then gets the flow velocity by measuring the difference between total pressure and static pressure(i.e.) dynamic pressure(∆P) and flow average velocity(V). -
ApplicationsVentilation pipes / Flue industry / Exhaust gas emission / Environmental protection engineering / Air conditioning systems / Vacuum cleaning / Especially high temperature and chimney, wind speed measurement of dusty air and high flow rate in environmental testing
-
Download
-
Specification
Environment
Operating pressure:Max.10 bar
Operating temperature:Max.250°C
Measuring medium:Air
Flow coefficient (K):1
Installation
Installation:Tube type
Connection
Installation connection 4 ... 12″below 3/4″PT movable thread, 18 ...40″below 1″PT movable thread
Outlet connection:1/8″G inside thread or 1/4″G inside thread
Material
Measuring tube:SUS316
Connection:Copper or stainless steel (Optional)Option list
AFMT-FLANGE-16
Flange (Small) 4" ... 12" applies
AFMT-FLANGE-25
Flange (Large) 18" ... 40" applies
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.