• THM06 Industrial Temperature and Humidity Transmitter

THM06 Industrial Temperature and Humidity Transmitter

Model : THM06
Input : Capacitive humidity sensor & Pt100
Output : 4 ... 20 mA / 0 ... 10 V / RS-485
Range : -40°C ... +180°C
Customized up to 200°C (Optional)
0 ... 100%RH (non-condensing)
Accuracy : [Temperature]±0.15°C+0.002°C x tactual
[Humidity (0 ... 90%)]Nonlinear error:±1.2%RH, Hysteresis error:±0.8%RH, Repeatability error:±0.4%RH
[Humidity (90 ... 100%)]±2%RH
IP rating : IP67
  • Features

    Adaptation to high temperature and high humidity conditions or harsh environments such as chemical pollution & condensation

    ● IP67, Stainless steel SUS304, Pressure resistance 16 bar
    ● 330° rotatable, lightweight, unrestricted installation
    ● Optional on-site real-time display
    ● Process temperature up to 180°C, custom up to 200°C (Optional)
    ● Output:Analog / RS-485
    ● Wide measurement range, Temp. : -40 ... +180°C, Humidity : 0 ... 100%RH
    ● Measuring parameter:relative humidity, dew point temperature, frost point temperature, wet bulb temperature, water vapor partial pressure, mixing ratio, absolute humidity and enthalpy.

    THM06 has a sturdy outer housing and a wide range of applications. It is also suitable for use in harsh environmental conditions.
    Capacitive sensor, high accuracy of temperature, and humidity measurement, fast response, fast recovery after condensation.
    It is stability even in long-term high humidity, also it has temperature compensation and computer linear calibration temperature and humidity function, suitable for industrial process gas supply or consumption, compressed dry air flow, and consumption monitoring.

    Each physical quantity measuring range is calculated by converting the temperature and humidity of the product. The values are for reference only.
  • Applications
    Semiconductor / Electronics / Steel industry / Chemical / Pharmaceutical / Biotechnology industry / Tobacco industry / Industrial process control (drying or humidification) / Environmentally controlled / High humidity storage / Food
  • Download
  • Specification
    Input
    Signal type : Capacitive humidity sensor & Pt100
    Temperature range : -40°C ... +180°C, Customized up to 200°C (Optional)
    Humidity range : 0 ... 100%RH (non-condensing)
    (Please refer tophysical quantity measuring range list)

    Output
    Signal : 4 ... 20 mA / 0 ... 10 V / RS-485
    Signal connection : 3-wire
    Accuracy
    Temperature : ±0.15°C+0.002°C x tactual
    Humidity (0 ... 90%) : Nonlinear error:±1.2%RH, Hysteresis error:±0.8%RH, Repeatability error:±0.4%RH
    Humidity (90 ... 100%) : ±2%RH
    Reaction time t90 (at +25°C) : <20 sec (S.S. metal grid filter with mesh), <30 sec (Sintered filter)
    Load resistance : Current output:≦ 500 Ω, Voltage output:≧ 100 KΩ

    Electrical
    Power supply : DC 24 V±10%
    Current consumption : DC 24 V:60 mA
    Electrical connections : M12 metal connector

    Environmental
    Medium : Air, or medium compatible with stainless steel
    Temp. Operating : -20 ... +60°C (Body);-40 ... +180°C (Probe)
    Humid. Operating : 0 ... 90%RH (Body, non-condensing)
    Probe pressure : 16 bar
    Storage temperature : -20 ... +60°C

    Installation
    Installation : Metal connector

    Protection
    IP rating : IP67
    Electrical protection : ■Polarity reversal protection ■Over-voltage ■Short-circuit

    Material
    Housing : SUS304
    Weight : Metal:318 g (without wire)
Note : Design and specifications are subject to change without notice.
Note : If the product has RS-485 function, to avoid damaging product, please make sure the product and the device which connect with RS-485 are on common ground.