CDA Compressed Dry Air, PSA Nitrogen Generation and ESG Gas Energy Management Applications
CDA Compressed Dry Air, PSA Nitrogen Generation and ESG Gas Energy Management Applications
Industrial facility illustrating compressed-air supply, receivers, drying and nitrogen generation equipment
GAS MONITORING · eyc-tech

CDA Compressed Dry Air, PSA Nitrogen Generation and ESG Gas Energy Management Applications

Connect flow, dew point and trace-moisture data to build an analyzable gas measurement framework.

Semiconductor facilities, electronics manufacturing and precision processes demand stable gas supply, controlled dryness and efficient consumption. From air compression, pretreatment and drying to pressure swing adsorption (PSA) nitrogen generation, high-purity nitrogen distribution and end-use equipment, operating conditions and gas demand at every stage affect supply quality, equipment operation and energy costs.

When facility or equipment managers can see only compressor electricity consumption but lack flow data from individual pipelines and equipment, it is difficult to tell whether energy use matches actual production needs. Without synchronized records of dew point, pressure and accumulated gas consumption, declining drying performance, changing supply conditions and unusual off-shift consumption are also harder to investigate.

eyc-tech combines flow, dew point and trace-moisture measurement points with electricity and pressure monitoring data to help companies establish continuous measurement from gas generation to end-use equipment. Integrating consumption data with power use, cost and applicable electricity emission factors provides a data basis for gas energy-efficiency analysis, equipment maintenance and ESG management.

Plan measurement points for the gas type, pipeline conditions and installation location. Energy and carbon calculations also require electricity data and consistent system boundaries.
SENSING POINTS / Five Measurement Stages

Five Measurement Points from Gas Generation to Point of Use

Combine measurement principles, product configuration and data integration to monitor gas generation, drying, nitrogen production and end-use consumption.

POINT 01

FDM09-I

Venturi Thermal Mass Flow Meter

Official eyc-tech FDM09-I product photograph

Compressor outlet / wet line upstream of pretreatment

Generation-side flow

POINT 02

THS88MAX

Industrial Low-Humidity Dew Point Transmitter

Official eyc-tech THS88MAX product photograph

Drying-system outlet / upstream of PSA

CDA dew point

POINT 03

FDM06-I

Venturi Thermal Mass Flow Meter

Official eyc-tech FDM06-I product photograph

PSA inlet / nitrogen main line

Instantaneous flow / totalized flow

POINT 04

THS90Q

Industrial Low-Humidity Dew Point Transmitter

Official eyc-tech THS90Q product photograph

High-purity nitrogen distribution main

Low dew point / trace moisture

POINT 05

FTM06D

Thermal Air Velocity and Flow Transmitter

Official eyc-tech FTM06D product photograph

Process equipment / branch gas line

Equipment-side flow

Conceptual industrial equipment for five measurement stages: compressor, filtration and drying, twin-tower PSA nitrogen system, gas pipeline with a round gauge and process equipment cabinets; measurement points correspond to FDM09-I, THS88MAX, FDM06-I, THS90Q and FTM06D. Instruments pictured are not actual transmitters.
Compressed air generationFDM09-I · Generation-side flow
Pretreatment and dryingTHS88MAX · CDA dew point
PSA nitrogen generationFDM06-I · Instantaneous / totalized flow
High-purity nitrogen distributionTHS90Q · Low dew point / trace moisture
Process equipment branchesFTM06D · Equipment-side flow
This illustration depicts five monitoring stages using realistic-looking equipment. Equipment and instrument appearances are conceptual only; they are not actual product photographs, construction piping drawings or precise mounting locations. The round gauge in the fourth panel is a pipeline context element, not the THS90Q dew point transmitter. Refer to the product cards and approved article for each measurement point. CDA and nitrogen branches depend on the actual system layout; animated arrows indicate general flow direction only.

01Compressed Air Generation and Pretreatment Flow Measurement

After a compressor pressurizes ambient air, the gas is processed through a receiver, filters and drying equipment before being supplied to the nitrogen generation system or process equipment. Gas at the compressor outlet contains more moisture, so generation-side flow measurement must account not only for produced air volume but also for the gas condition, piping and measurement location.

The FDM09-I Venturi Thermal Mass Flow Meter can be installed on the wet compressed-air line ahead of pretreatment as a flow monitoring point at the generation stage. Continuous records of produced air and compressor electricity use allow comparison of generation performance under different loads and operating periods, supporting subsequent analysis of specific energy consumption and air supply efficiency.

Comparing these records with consumption data from downstream mains and equipment can further reveal differences between gas generation and actual use and narrow the search for abnormal consumption.

02CDA Drying System and Supply Dew Point Monitoring

Moisture content is an important part of compressed dry air (CDA) supply quality. When the operating conditions of refrigerated or adsorption dryers change, outlet dew point can also change. Dryer operating signals alone are not enough to confirm the dryness of the air actually being supplied.

The THS88MAX Industrial Dew Point Transmitter can be positioned at the drying-system outlet or upstream of the PSA nitrogen generator to continuously monitor CDA dew point. These measurements help assess drying performance and verify gas dryness before it enters the nitrogen generation system.

Comparing dew point trends with equipment operation records helps managers identify changes in drying effectiveness and plan inspections of dryers, condensate drains and associated pretreatment equipment.

03PSA Nitrogen Generation and Main Supply Flow Measurement

A PSA nitrogen generator uses compressed air as its feed gas and separates gases through pressure swing adsorption before supplying nitrogen to downstream processes. Feed flow and nitrogen supply flow change with production load, generator operating conditions and downstream demand, so flow measurement points are needed at suitable locations.

Depending on the actual gas and pipeline conditions, the FDM06-I Venturi Thermal Mass Flow Meter can be used on compressed-air or nitrogen mains to continuously obtain instantaneous and accumulated flow data, helping operators understand supply and consumption conditions.

Recording flow separately at the nitrogen generator inlet and nitrogen outlet, together with operating hours and electricity data, enables comparison of gas use and energy consumption under different loads and supports system adjustments and operation management.

04High-Purity Nitrogen Distribution and Trace-Moisture Monitoring

While high-purity nitrogen is transported from the generator to points of use, operators must maintain suitable supply flow and pressure and, where process specifications require, monitor trace moisture in the gas. Even when generator outlet gas meets the specified conditions, downstream pipes, connections and maintenance activities can affect distribution quality.

As illustrated, the THS90Q Industrial Ultra-Low Dew Point Transmitter can be configured on a high-purity nitrogen main to continuously monitor dew point changes under low-moisture conditions, providing dryness measurements for semiconductor and precision processes.

Comparing dew point trends on the main line and at critical points of use helps identify possible moisture changes during distribution and supports pipeline inspections, post-maintenance checks and supply-quality tracking.

05Gas Consumption Measurement at Process Equipment and Branch Lines

Total consumption on a supply main reflects overall demand but does not readily reveal differences between individual machines or branches. Without equipment-level measurements, excessive standby consumption, leaking valves or ongoing line losses may remain hidden in total gas usage.

The FTM06D Thermal Mass Flow Transmitter can be used to establish a measurement point on an appropriate equipment branch, taking account of gas and pipeline conditions. It tracks flow during production, standby and shutdown and helps compare gas-consumption patterns between machines.

Comparing data from mains, branches and individual equipment narrows investigations into unusual gas use. When combined with production states and maintenance logs, the data can also guide leak checks, preventive maintenance and consumption management.

06Gas Energy Efficiency, Cost and Carbon Emissions Analysis

When gas-flow data is integrated with electricity consumption over the same time period and system boundary, it can support energy-efficiency and cost indicators. Beyond hourly and daily gas consumption, operators can calculate energy use per unit of gas to compare performance across production loads and operating conditions.

Common indicators include instantaneous flow (Nm³/h), daily gas consumption (Nm³/day), electricity use (kWh), specific gas energy consumption (kWh/Nm³) and electricity cost per unit of gas (NT$/Nm³). Dew point and supply pressure provide operating context for assessing whether changes in energy use coincide with changes in supply quality or settings.

Electricity-related carbon emissions attributable to gas consumption can be estimated conceptually as follows:

Gas consumption (Nm³) × Specific gas energy consumption (kWh/Nm³) × Applicable electricity emission factor (kg CO₂e/kWh) = Associated electricity emissions (kg CO₂e)

Calculations should confirm whether the electricity boundary includes compression, drying, nitrogen generation and auxiliary equipment, and use the emission factor appropriate to the relevant year and scope. Before-and-after comparisons should also account for production volume, gas demand and supply conditions to maintain a consistent basis for evaluating energy and carbon improvements.

07From Gas Measurement to ESG Management: A Traceable Basis for Improvement

Managing energy in CDA and PSA nitrogen systems requires measurement at gas generation, drying, distribution and equipment use. Continuous records of flow, dew point, trace moisture, pressure and electricity enable comparison of supply quality with energy consumption and a more complete view of system operation.

Through measurement configurations at each stage, eyc-tech helps companies build a data foundation for gas consumption and quality management. Monitoring or energy management systems can then integrate the information for abnormal-consumption investigations, maintenance planning, energy-cost analysis and ESG reporting support.

ENERGY & ESG / Management Indicators

Turn Measurement Data into Energy Management Indicators

Nm³/hInstantaneous flow
Nm³/dayDaily gas consumption
kWhElectricity consumption
kWh/Nm³Specific gas energy use
NT$/Nm³Electricity cost per unit of gas

Dew point and supply pressure provide operating context. Carbon calculations should follow the approved Word formula and use an electricity emission factor appropriate to the year and system boundary.

MEASUREMENT MAP / Measurement Point Comparison

Comparison of Five Measurement Stages

Comparison itemFDM09-ITHS88MAXFDM06-ITHS90QFTM06D
Measurement locationCompressor outlet / wet line upstream of pretreatmentDrying-system outlet / upstream of PSAPSA inlet / nitrogen main lineHigh-purity nitrogen distribution mainProcess equipment / branch gas line
Measurement dataGeneration-side flowCDA dew pointInstantaneous flow / totalized flowLow dew point / trace moistureEquipment-side flow
Management purposeCompare compressed-air production with electricity useTrack drying performance and supply-quality changesCompare nitrogen feed, output and power useTrack gas dryness and pipeline maintenanceCompare gas use during production / standby / shutdown
Planning considerationsConfirm gas type and actual operating conditionsVerify dew point range and installation conditionsGas medium and calibration requirementsConfirm sampling and measurement conditionsBranch gas medium and piping conditions

FDM09-I

Measurement location
Compressor outlet / wet line upstream of pretreatment
Measurement data
Generation-side flow
Management purpose
Compare compressed-air production with electricity use
Planning considerations
Confirm gas type and actual operating conditions

THS88MAX

Measurement location
Drying-system outlet / upstream of PSA
Measurement data
CDA dew point
Management purpose
Track drying performance and supply-quality changes
Planning considerations
Verify dew point range and installation conditions

FDM06-I

Measurement location
PSA inlet / nitrogen main line
Measurement data
Instantaneous flow / totalized flow
Management purpose
Compare nitrogen feed, output and power use
Planning considerations
Gas medium and calibration requirements

THS90Q

Measurement location
High-purity nitrogen distribution main
Measurement data
Low dew point / trace moisture
Management purpose
Track gas dryness and pipeline maintenance
Planning considerations
Confirm sampling and measurement conditions

FTM06D

Measurement location
Process equipment / branch gas line
Measurement data
Equipment-side flow
Management purpose
Compare gas use during production / standby / shutdown
Planning considerations
Branch gas medium and piping conditions
INDUSTRY / Application Areas

Gas Monitoring and Management Applications

Semiconductor facilities

Monitor CDA and high-purity nitrogen supply conditions

Read semiconductor facility article
Electronics manufacturing

Monitor process-equipment gas use and dryness

Read electronics manufacturing article
Precision processes

Monitor dew point and trace moisture in critical pipelines

View THS90Q product information
Equipment energy management

Cross-analyze flow, electricity and cost data

Read compressed-air system integration article
FAQ / Frequently Asked Questions

Frequently Asked Questions: CDA, PSA Nitrogen and Gas Energy Management

Why monitor both flow and dew point in a CDA system?

Flow data indicates supply and consumption changes, while dew point data indicates gas dryness. Comparing both with operating records gives a more complete picture of supply conditions.

Can PSA nitrogen purity be determined from inlet and outlet flow alone?

No. Flow data can compare feed, delivery and operating conditions, but nitrogen purity must be measured separately with suitable gas analysis equipment.

How do THS88MAX and THS90Q differ in this application?

This article places THS88MAX at the CDA dryer outlet and THS90Q at a low-moisture monitoring point on a high-purity nitrogen line. Final selection depends on dew point range, gas medium and installation conditions.

Can a main-line flow reading directly identify a leaking machine?

A main-line reading reveals overall changes but usually needs branch- or equipment-level data, operating schedules and maintenance records to narrow down the source.

How can gas flow and electricity data be combined for emissions analysis?

Use gas consumption, electricity use and specific gas energy consumption for the same period and consistent boundary, then apply the electricity emission factor appropriate to the year and reporting scope.

Can compressed air and nitrogen use the same flow calibration settings without adjustment?

Do not assume so. Confirm applicable gases, calibration settings and actual pipeline conditions using manufacturer guidance.

Make gas consumption visible, calculate energy use, and quantify energy-saving and carbon-reduction results.