New Products

Feature：Suitable for harsh environments, industrial processes flow monitoring or slightly corrosion compressed air
Input type：Pt20 / Pt300(Air velocity)，Pt1000(Temp.)
Measuring range：0 ... 120 Nm/s
Output signal：4 ... 20 mA / 0 ... 10 V / RS-485 / Impulse
Linear accuracy：±1.5%
Installation：Duct type / Remote type
IP rating：IP67
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA

Feature : Adaptation to high temperature and high humidity conditions or harsh environments such as chemical pollution & condensation
Input : ​capacitive humidity sensor & Pt100
Measurement range : ​-40 ... +120°C ;
Customized up to 150°C (Optional) ;
0 ... 100%RH (Non-condensing) ; -50 ... +60 dp°C
Output: ​4 ... 20 mA / 0 ... 10 V / RS-485
Signal connection : 3-wire
Accuracy :±0.15°C+0.002°C x t actual ;
0 ... 100%RH (Non-condensing) ; ±3dp°C ± (0.02%F.S./°C)
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA

Output：4 ... 20 mA, Maximum load：600 Ω
Accuracy：2.0% (±0.5 m/s ... 5.0 m/s)
Power supply：DC 24 V
Liquid：Water, Chemical, Oil
IP rating：IP54
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA

Accuracy：±1%
Velocity range：0 ... ±10 m/s
Pipe size：DN15 ... DN6000 mm
Liquid temperature：-30 ... 160°C
Liquid type：Water, sea water, waste water, alcohol, beer, various kinds of oil etc which can conduct ultrasound single uniform liquid

Signal isolation：Power supply；Analog input
3 groups of analog output
1 set RS-485 output
Accuracy：±0.05% of span ±0.0025% / °C
Output signal：4 ... 20 mA, DC 0 ... 10 V

Features：Has a high degree of intelligence and flexibility, It can continuously measured the conductivity / resistance value of solution.
Measuring range：0.055 μs/cm ... 200 ms/cm
Accuracy：±1%F.S. temperature：manual or automatic(Pt1000 or NTC 10 K)
Resolution：0.01 μs/cm
Signal output：4 ... 20 mA isolation protection output，independent corresponding PH / ORP or temperature, maximum load is 500 Ω

Output：RS-485 / Voltage signal terminal CO2
Measuring range：0 … 2,000 / 0 … 5,000 / 0 … 20,000 (PPM) (Max.：50,000 PPM)
Accuracy：±40 PPM±3% of reading(at 25°C)
IP rating：IP65

Output：0 ... 5 V corresponding to 0 ... 20 vol.% CO2
Measuring range：0 ... 20%vol.(0 ... 5 V) / 0 ... 30%vol.(RS-485)
Accuracy：±0.2%vol.CO2±3% of measured value

Note:This product only available in Taiwan, China and Hong Kong.
Applicable to measurement and analysis of environmental protection industries such as semiconductor, agriculture, water resources, etc.
UV-D photometric method determination of ozone concentration, traceable to NIST international standards
Measuring range：
Standard type(User-range)：1000 ppmv
Standard type(Auto-range)：1 ... 100 ppm
Resolution：
Standard type(User-range)：Min. 0.1 ppmv at 1000 ppm
Standard type(Auto-range)：Min. 0.1 ppbv at 1 ppm

Counting range：0.5 / 1 / 3 / 5 μm
Effective measurement range：＜100,000 count/L
Flow：2.83 L/min
Communication：2 sets RS-485

Suitable for various indoor measurement
Lightweight and easy to carry
Type：Electrochemical sensor
Measuring range：0 ... 5 ppm(Note 1) / Continuous active sampling real-time detection
Output：Built-in Bluetooth 4.0 / APP software for mobile and pad and PC