SPD4/5/7/9 PID Process Controller

● Super short housing, panel length 62-65mm
● Accuracy ± (0.25%F.S. +1 digit); sampling time is 0.25/sec.
● Input type: thermocouple, platinum resistor, voltage, current.
● Process controlling direction: PID/ ON-FF
● Controlling option: Backward direction (heating) / forward direction (cooling).
● Output adjustment automatically / manually:0.0%~100.0%.
● Option: Output 2, retransmitting via RS485

SPD4/5 display：PV red 4-digit, 7-segment LED display(height of character: 12mm), SV green 4-digit, 7-segment LED display(height of character: 9mm)
SPD9 display：.PV red 4-digit, 7-segment LED display(height of character: 20mm), SV green 4-digit, 7-segment LED display(height of character: 13mm)
Status display：green -RUN, AT, OUT1; acceptable input value of voltage and current -1999~9999

Input
Thermocouple：.K, J, T, E, R, S, U, N, B, PII, Wre5-26
Resistance bulb：PT100, JPT100
Voltage (mV)：0~10mV,0~20mV, -10~10mV,0~50mV,0~100mV
Voltage (V)：0~1V,0~2V, -1~1V,1~5V,0~5V,0~10V
Current (mA)：4~20mA,0~20mA
Thermocouple resistance：>500KΩ, outside resistance <100Ω
RTD cable resistance range：every cable <5Ω(the resistance for 3 cables should be the same)
Voltage (mv/V) / Current(mA) Input resistance：>500KΩ/250Ω
PV filter：0~9999 sec.
Contact control output：NO (1a) 240VAC 2A (resistance load)
Voltage pulse：(SSR output) 12VDC (-1.5~1V) max. 20mA
Current output：. 4~20mA DC ; load resistance below 500Ω
Voltage output：0~10V DC max. 2mA
Operating condition：-10~55°C ; relative humidity < 90%rh.(non-cond.)
Storage temperature：-20~65°C
Power supply：90~264VAC 50/60Hz
Power consumption：90~264VAC max. 9VA
Input noise removal ratio：50dB or above
Impulse-proof noise：normal power supply range100ns/1μs±1500V
Housing：PPO or PPE
Housing color.：light grey
Weight：SPD4 : ca. 100g / SPD5 : ca. 140g / SPD9 : ca. 200g