• eYc P041 Pressure Transmitter

eYc P041 Pressure Transmitter

Output : 4 … 20 mA
Measuring range :10 bar ( Relative pressure )
Linear accuracy : ±0.3% of F.S.
Power supply : DC 10 ... 30 V
IP rating : IP65 (DIN 43650)
●YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report, for more detailed information please contact us.
(TAF accreditation:3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA
Model : eYc P041

Housing SUS304 outer
Compact and rugged design and easy to install
With reasonable price, high accuracy and stability in a long-run

More potential product articles, welcome to visit the link below
eYc-Success-StoryeYc-FAQ

Input
Sensor type : Piezoresistive diaphragm
Measuring range : 10 bar ( Relative pressure )
Pressure overload range : 
Pressure range
0.25 ... 0.4
0.6 ... 1
2
2.5 ... 4
6 ... 10
Overload range
2.5
3
4
7
15

Output
Output : 4 … 20 mA
Signal connection : 2-wire
Linear accuracy : ±0.3% of F.S.
Load resistance : ≦(Operating voltage-10 V ) / 0.02 A Ω
Output calibration(ZERO & SPAN) adjustment range : ±10% of Zero-point and full-scale
Response time : ≦5 ms

Environment
Measuring medium : Air / Liquid
Medium Temp. : 85℃;Cooling connector≦100℃(Option)
Operating Temp. : 85℃
Operating humidity : 100%RH
Storage temperature : -40 ... +100℃
Zero-point error : ±0.2% F.S. / 10 K
Measuring range tolerance : ±0.2% F.S. / 10 K

Electrical
Power supply : DC 10 ... 30 V
Current consumption : <20 mA
Overvoltage protection : ≦DC 33 V
Electrical connection : DIN 43650

Installation
Installation : Duct
Connect thread : Outside thread : 1/2″PT, 1/4″PT

Certification
Certification : CE

Protection
IP rating : IP65 (DIN 43650)
Electrical protection : ■ Over-voltage ■ Polarity ■ Short-circuit
Flutter test : 20 g(20 ... 5000 HZ)

Material
Housing : SUS304
Wetted part : SUS304
Sensor : SUS316L
Oil seal : Viton
Weight : 150 g

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.
Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.


Measuring pressure for liquid and air / Research and Development / Laboratory / Processing engineering / Building / Liquid / Air pressure measurement / Machine devices / Water plant / Air devices