Exhaust gas emission

Output signal: analog / RS-485 / Impulse output
Input signal type: Thermal mass flow sensor
Measuring range: Air : 0 ... 20 m/s ; 0 ... 40 m/s；Water : 0 ... 1.5 m/s ; 0 ... 3 m/s
Accuracy: Air: ±3% 0 ... 20 m/s, ±5% 0 ... 40 m/s
Water :±3% 0 ... 1.5 m/s, ±5% 1.5 ... 3 m/s
IP65 (IP67 optional)
●YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report, for more detailed information please contact us.
(TAF accreditation：3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA

Features：In this way, a stable and accurate figure can be collected and shown on the display of terminal instrument
Input：Pt100(3-wire)
Output：DC 4 ... 20 mA；2-wire
Accuracy：±0.1% of F.S.
Temperature Range：-50 ... +50°C / -50 ... 0°C / 0 ... 50°C / 0 ...100°C / 0 ... 200°C / special span
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA

Features:Local display, easy keypad programming the signal output and scale, led for working status.
Accuracy : 0.2%F.S.±1 digital
Sampling time : 4 cycle / sec
Response time adjustment range : 0.5 ... 60 sec
Input & Output : Voltage 0...5 V / 0...10 V ; Current 0...20 mA / 4...20 mA
Output signal : Analog output / Relay / RS-485

Feature：Measuring input type : DC current / DC voltage, More output type：Analog output / Relay / RS-485, Extraction of square root(Input : Voltage, Current)
Display readout：5 digits(-9.9.9.9 ... +9.9.9.9.9), 7-segment display
Accuracy：0.1%F.S.±1 digital
Input, Output：0 ... 10 V, 4 ... 20 mA

Feature :
Measurement accuracy 1 %
Converter protection class IP 67 , transducer protection class IP 68
Wide measurement range , pipe size from DN15mm to DN6000mm
Connect the temperature transducer can finish the heat / energy measurement
●Additional option (ILAC/TAF) Test report - Standard Calibration laboratory(TAF Accreditation: 3032)

Output：Square wave frequency NPN output
Input：Liquid
Range：0.3 ... 6 m/s
Accuracy：±0.5% F.S.(K factor calibrated)@V≧ 0.5 m/s

Feature：High temperature resistance Corrosion resistant, Anti-clogging Data convert to flow rate quickly
Duct-mounting type / Material：Stainless 316
Operating temperature：Max. 250°C
Length：4" ... 40"(100 ... 1000 mm)
Option:differencial pressure trainsmitter(Can measure flow)

Feature : High temperature resistance, Corrosion resistant, Anti-clogging, Data convert to flow rate quickly
Operating pressure : Max 10 bar
Operating temperature : 800°C
Measuring medium / coefficient : Air / flow coefficient(K)：0.84

Range：0 ... 500 pa
Input：Thermo differential pressure module​
Output：0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V /1 ... 5 V / 2 ... 10 V / 0 ... 10 V​
Accuracy：± 0.5 % of F.S.
Display：Optional

Feature：
Input：Piezoelectric differential pressure module
Output：0 ... 20 mA / 4 ... 20 mA / 0 ... 5 V / 0 ... 10 V
Range：±50 ... ±2500 pa
Accuracy：±2.0% of F.S.
Display：Optional

Feature：Suitable for harsh environments, industrial processes flow monitoring or slightly corrosion compressed air
Input type：Pt20 / Pt300(Air velocity), Pt1000(Temp.)
Measuring range：0 ... 120 Nm/s
Output signal：4 ... 20 mA / 0 ... 10 V / RS-485 / Impulse
Linear accuracy：±1.5%
Installation：Duct type / Remote type
IP rating：IP67
●YUDEN-TECH CO.,LTD. Calibration Laboratory - ( ILAC / TAF ) Test report, for more detailed information please contact us.
(TAF accreditation：3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA

Features：SS housing, all-in design with anti-condensation function and good heat dissipation.
Good measuring repeatability and anti-interference.
Input：Pt100
Output：DC 4 ... 20 mA；2-wire
Accuracy：±0.5% of F.S.
Temperature range：-50 ... + 50°C / -50...0°C / 0 ... 50°C / 0 ... 100°C / 0 ... 200°C or special range
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA