CDA system / Equipment / Factory

Features :Speed Upgrade 150%
Input : Capacitive humidity sensor & PT100 Ω
Output : Standard RS-485 & 1 analog output
Pressure resistance : 16 bar
Working range of dew point : -60 ... +60 dp°C
Linear accuracy : ±2 dp°C
Max. Scaling range : Dew point : -100 ... +60dp°C
●Additional option (ILAC/TAF) Test report - Standard Calibration laboratory(TAF Accreditation: 3032)

Features : With temperature compensated and linear correction / Physical quantity & temperature linear correction output by computer program / Industrial class sensor comes with high accuracy, long-term stability,and anti-condensation function.
Input : Capacitive Humidity Sensor & Pt100Ω
Output : 0...20mA / 4...20mA / 0...5V / 0...10V
Linear accuracy ( at + 25°C ) : ±0.15°C ± 0.002 °C x tactual / ±3dp°C ± ( 0.02 % F.S / °C )
Temp. influence of body ( at + 25 °C ) : 0.02 % F.S. / °C
Display：Optional
●Additional option (ILAC/TAF) Test report - Standard Calibration laboratory(TAF Accreditation: 3032)

Feature：Measuring input type : DC current / DC voltage, More output type：Analog output / Relay / RS-485, Extraction of square root(Input : Voltage, Current)
Display readout：5 digits(-9.9.9.9 ... +9.9.9.9.9), 7-segment display
Accuracy：0.1%F.S.±1 digital
Input, Output：0 ... 10 V, 4 ... 20 mA

Input signal : 4 ... 20 mA DC​
Power : 4 ... 20 mA, 2-wire loop power​
Electrical connection : DIN 43650 plug / M12 connector​
Max. 330° turnable

For pressure, hydraulic & pneumatic equipment, Anti-interference, long-term stability, Provides multiple types of pressure connections
Measuring range : -1 ... 400bar
Pressure type : Relative pressure, absolute pressure
Output signal / Power supply : 4 ... 20mA, 0 ... 5V, 0 ... 10V (12 ... 30VDC) / 0.5 ... 4.5V R/M(5VDC)
Accuracy : ±0.5%F.S.(typ.)
Response time : ＜ 4ms
Ambient Temp. : -20 ... 80°C
IP rating : IP65
●Additional option (ILAC/TAF) Test report - Standard calibration laboratory (TAF accreditation：3032, using ISO/IEC 17025)

Feature:
Hysteresis:Depends on switching point, minimum 0.6 L / min
Medium:Water, Oil, Gas
Connection mode:Connector specification M12
Pressure resistance:Stainless steel : 100 bar, Plastic : 10 bar

Features：
Sensor Type：Thermal mass flow sensor
Air Velocity Measuring Range：0.15 ... 90 m/s
Air Velocity min. Measuring Range：0.15 m/s
Temp. Sensor / Measuring Range：Pt1000, 0 ... 80°C
Accuracy(+25°C)：Air velocity：±1.5%F.S.
Output：0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V / 0 ... 10 V
Display：Optional
●Additional option：(ILAC/TAF)Test report-Standard calibration laboratory(TAF accreditation：3032, complying with ISO/IEC 17025)
TAF has mutual recognition arrangement with ILAC MRA

Max. scaling range：-100 ... +60 dp°C
Linear accuracy(Operating range of dew point：-60 ... +60 dp°C)：±2 dp°C(at +25°C)±(0.02%F.S. / °C)
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA

Feature：Suitable for harsh environments, industrial processes flow monitoring or slightly corrosion compressed air
Input type：Pt20 / Pt300(Air velocity)，Pt1000(Temp.)
Measuring range：0 ... 120 Nm/s
Output signal：4 ... 20 mA / 0 ... 10 V / RS-485 / Impulse
Linear accuracy：±1.5%
Installation：Duct type / Remote type
IP rating：IP67
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory ( TAF accreditation：3032, complying with ISO/IEC 17025 )
TAF has mutual recognition arrangement with ILAC MRA

Features：Temperature & Humidity / Dew point / Frost point /
Wet-bulb Temp. / Vapor pressure / Mixture ratio / Absolute humidity / Specific enthalpy
Input：Capacitive humidity sensor & Pt 100 class A
Output：Standard RS-485 or 2 analog output / 0 ... 20 mA / 4 ... 20mA / 0 ... 1V / 0 ... 5V / 0 ... 10V
Linear accuracy(at 25°C)：Temperature ±0.2°C±0.005°Cxtactual / Humidity (at+25°C)±2%RH
Operating range suggestion：Temperature 0 ... 50°C(THS301)；- 40 ... + 80°C(THS302 / 304 / 307) / Humidity 0 ... 100%RH / Dew point - 40 ... + 60 dp°C / Other please refer to physical quantity measuring range list.
●Additional option：( ILAC/TAF ) Test report - Standard calibration laboratory (TAF accreditation：3032, complying with ISO/IEC 17025)TAF has mutual recognition arrangement with ILAC MRA